How do I generate ALP data tables?

Enter the airport (NASR auto-fill by identifier) or runway data, and AvPlot generates the Airport Data, Runway Data, and Declared Distance tables as XLSX or DXF per FAA ARP SOP 2.00 Appendix A.3.

What tables appear on an Airport Layout Plan?

The ALP data sheet typically includes Airport Data, Runway Data, Declared Distance, and design-standards tables, each with existing and ultimate values, per FAA ARP SOP 2.00.

Where do ALP table standards come from?

From FAA ARP Standard Operating Procedure 2.00, Appendix A.3, with design dimensions drawn from AC 150/5300-13B.

← Home

ALP Data Tables

ARP SOP 2.00 Appendix A.3 / SPI ALP data-table package — Runway / Airport / Critical Aircraft / Taxiway / NGS / Wind / Declared Distances / Buildings / Modifications — beta

Source modeStep 1

Auto mode pulls runway data from the FAA NASR subscription. NASR-only — OurAirports fallback is not accepted for ALP tables (it lacks declared distances and per-end data). If an airport isn't in NASR, switch to Manual.

Airport (FAA LID / ICAO)

Default condition columns (each runway inherits these when an airport is looked up; adjust per runway below)

Runway design codes (RDSM design-standard rows)Step 2

Each row sets AAC / ADG / visibility for one runway (by id, e.g. 17/35 or 17) or all runways (blank id). Drives the RDSM design-standard dimensions and Part 77 rows folded into the Runway Data table. The Aircraft Library can classify AAC/ADG.

Runway id (opt)	AAC	ADG	Visibility	Approach type	Small aircraft

Critical aircraft (per runway & condition)Step 3

Set the design aircraft for each runway and condition. Pick from the aircraft library to auto-fill AAC, ADG, approach speed, wingspan, length, tail height, and MTOW — or type AAC/ADG manually. Drives the Critical Aircraft Table.

One row per runway × condition. Run after editing runways or conditions.

Runway	Condition	Design aircraft	AAC	ADG	App spd (kt)	Wingspan (ft)	Length (ft)	Tail ht (ft)	MTOW (lb)

Look up an airport (or add manual runways), then click “Sync with runways”.

Supplemental tables (manual entry)Step 4

AvPlot has no automated source for these SPI ALP tabs — add rows to fill them. The XLSX/DXF shells (correct headers and order) are produced either way, so the format is ready even if left blank.

Taxiway Data (Existing / Future per field)

Desig. E	Desig. F	TDG E	TDG F	Width E	Width F	Shoulder E	Shoulder F	TSA E	TSA F	TOFA E	TOFA F	TESM E	TESM F	Lights E	Lights F

NGS Survey Monuments

PID No.	Designator	Latitude	Longitude	Marker	Elev (MSL ft)

Wind Coverage (crosswind coverage %, by runway end)

All Weather

Runway End	10.5 kt	13 kt	16 kt	20 kt

IFR

Runway End	10.5 kt	13 kt	16 kt	20 kt

VFR

Runway End	10.5 kt	13 kt	16 kt	20 kt

Buildings & Facilities

Building No.	Description	Elev (MSL ft)

Generate packageStep 5

Format

Project name

Package contents

Airport Data

Existing/Future: elevation, ARP, NAVAIDs, mag var, NPIAS

Runway Data

Per runway/condition; RDSM dims (RSA/ROFA/RPZ/POFZ) + Part 77 folded in

Critical Aircraft

AAC/ADG + speed/wingspan/length/tail/MTOW

Taxiway / NGS / Wind / Buildings

Manual-entry shells (Step 4) in the SPI template format

Declared Distances

Existing/Future blocks: TORA / TODA / ASDA / LDA per end

Modifications of Standards

Description / FAA approval / MOS ID (None by default)